I'm not an expert in the LLM space, but I'm an external contributor to comma.ai's openpilot project and I'm and quite familiar with how its controls work, so I looked from that perspective. There's two questions here:
1) Could a cloud-delivered LLM figure out how to drive this route, based on those input data and given access to those output actuators? Looks like yes. Sure.
2) Could this work in the real world? Absolutely not. Three reasons: latency, latency, and latency.
openpilot's driving model updates the target curvature and acceleration at 20Hz. Every millisecond of the round trip time through every piece of its entirely-local driving stack is well-understood, extremely consistent, and tightly optimized. It has to be, otherwise you can't react to even minor bumps or wind gusts, much less rapidly-developing traffic situations.
Adding even a single speed of light RTT to a cloud service is meaningfully bad, and you'll need a whole lot more to encode and upload camera imagery to even start the time-to-LLM-response clock, and then send the response back down. By then the world around the car has moved on.
There's a reason Tesla and every other self-driving manufacturer need the compute hardware in the car.
I'm far from neuroscience, but humans don't need to operate at 20Hz to drive a car. And human reaction latency (event to measurable action) is often over 1s (under 1Hz).
The reaction latency you’re referring to for humans includes perception, planning, and actuation, I’d separate that from the concerns of the hardware, which are mostly about actuation frequency.
From what I understand about AV (as a non-expert!), all three of those steps happen at different clock rates, ie you have a planner that’s updating continuously with observations from sensors at one rate, that planner then issues actions that get picked up by the actuators at another rate.
In that sense 20hz should really be compared to human reflexes without perception and planning; in scenarios where one is anticipating an action, response time can be as low as 150ms. in that context, I think 50ms/20hz is plenty reasonable for an automated driver.
In circumstances where one is maintaining grip or muscle tension (e.g. steering a car) I believe human response time can be more like 50ms. Which perhaps unsurprisingly lines up with the 20hz figure pretty close to exactly (we built cars controls so that they're controllable by human reflexes).
Though you can't convert between hz and latency, all 20hz tells us is that it adjusts 20 times a second, not how long it takes from sensor input to be fed into a particular choice of adjustment, there could be (and actually almost certainly are) multiple adjustments in flight simultaneously with the adjustment actually being applied being calculated from old data (both in humans and automated substitutes).
jyoung8607 · · focus · HN ↗
1) Could a cloud-delivered LLM figure out how to drive this route, based on those input data and given access to those output actuators? Looks like yes. Sure.
2) Could this work in the real world? Absolutely not. Three reasons: latency, latency, and latency.
openpilot's driving model updates the target curvature and acceleration at 20Hz. Every millisecond of the round trip time through every piece of its entirely-local driving stack is well-understood, extremely consistent, and tightly optimized. It has to be, otherwise you can't react to even minor bumps or wind gusts, much less rapidly-developing traffic situations.
Adding even a single speed of light RTT to a cloud service is meaningfully bad, and you'll need a whole lot more to encode and upload camera imagery to even start the time-to-LLM-response clock, and then send the response back down. By then the world around the car has moved on.
There's a reason Tesla and every other self-driving manufacturer need the compute hardware in the car.
ivanjermakov · · focus · HN ↗
I'm far from neuroscience, but humans don't need to operate at 20Hz to drive a car. And human reaction latency (event to measurable action) is often over 1s (under 1Hz).
chaos_emergent · · focus · HN ↗
From what I understand about AV (as a non-expert!), all three of those steps happen at different clock rates, ie you have a planner that’s updating continuously with observations from sensors at one rate, that planner then issues actions that get picked up by the actuators at another rate.
In that sense 20hz should really be compared to human reflexes without perception and planning; in scenarios where one is anticipating an action, response time can be as low as 150ms. in that context, I think 50ms/20hz is plenty reasonable for an automated driver.
gpm · · focus · HN ↗
Though you can't convert between hz and latency, all 20hz tells us is that it adjusts 20 times a second, not how long it takes from sensor input to be fed into a particular choice of adjustment, there could be (and actually almost certainly are) multiple adjustments in flight simultaneously with the adjustment actually being applied being calculated from old data (both in humans and automated substitutes).